House Tour Part IV: Our Bedroom

It’s been a while since I did a house tour segment, so I today I am going to share our bedroom.  Here is a picture of how the room looked when we moved in.

KJ-Bed-Before

The previous owner must have had a love for bold colors and geometric shapes.  Although it’s definitely not my style, I have to admit that it is quite creative–but not creative enough to warrant leaving it as is.  One of the first things we did when we got the keys was get out the paint rollers.

KJ-Bed5

We used the same colors that we did in all the other rooms –Behr Twilight Gray (750E-2) and Behr Shale Gray   (540F-4).

KJ-Bed6\

We already had most of the furniture from our old bedroom, with the exception of the two night stands.  The one of the left is Joey’s, and the the yellow filing cabinet on the right is mine.   They were both Goodwill Outlet finds.

KJ-Bed1

The blanket at the foot of our bed is reserved for Zuzu’s naps–Yes, Zuzu has her own designated blanket.  She is such a spoiled dog.  The reason we got her a blanket is because she does this weird scratching routine before she lays down.  It’s almost like she is digging, but I think she is just trying to get comfortable.  Unfortunately, she made some big holes in our poor Anthropologie bedspread, so we bought her a cheap blanket from Ikea.  It’s all hers, so she can scratch it to her heart’s content.

KJ-Bed3

The large photo on the wall is from one of my diy projects.  It’s an old photo from the Library of Congress that was enlarged and printed on engineering prints.

KJ-Bed2

Here is a breakdown of  where we got all the furniture and decor:  Bed, Blanket, & Rug Ikea; Bedspread Anthropologie; Nightstands Goodwill Outlet; Sheets Target; Accent Pillow Nordstrom; Tin Guitar made by Joey; Dulcimer gift; Photo Print: DIY project.

I hope you enjoyed a peek into our home!

4 Comments on House Tour Part IV: Our Bedroom

  1. Stephen Prentice
    June 23, 2013 at 6:44 pm (4 years ago)

    Fantastic style. Love the yellow accents. Ep

    Reply
  2. jen
    November 23, 2013 at 1:55 pm (3 years ago)

    Thank you so much for sharing this….of the engineering prints. They look fabulous! How did you mount them on the boards/material and how did you hang them. I’d love to know! All the best

    Reply
    • Kathryn
      November 23, 2013 at 9:20 pm (3 years ago)

      Thanks so much! Each print was mounted to a foam board with spray adhesive. Then I used Command Picture Hanging Strips to hang the board. It was actually fairly easy :)

      Reply
      • Jen
        November 23, 2013 at 9:44 pm (3 years ago)

        Thank you!

        Reply

Leave a Reply

Your email address will not be published. Required fields are marked *






Comment *